Heatless Air Dryer Dew-point:-40Deg.C,CE

Adopt technology of pressure swing adsorption ,regeneration without heat. Short switch cycle. Adopt PIC automatic controller.

Introduction:

tower, one set of switching valves and one set of controlling system. In the switching time,  one  tower  is adsorbing while the other one is regenerating. When adsorbing,  the compressed air  flow through  the air inlet valve, then flow into the tower to adsorb. When regenerating, a portion  of dried air is diverted from the main pipeline as regeneration gas, then through the throttle orifice  to  reduce  it’s pressure.  Regeneration gas flow by inlet valve  into the adsorber to regenerating , then pass through the outlet valve  and be discharged through the  muffle  to  atmosphere.

 

Features:

Adopt technology of pressure swing adsorption ,regeneration without heat.

Short switch cycle.

Adopt PIC automatic controller.

Simple process, low failure rate,low investment cost.

Integrated delivery,Easy to maintain and operate.

Famous brand components to ensure long time running.

Need to consume a certain portion of purge air .

 

Main Technical Data:

Working pressure      5 -10 bar

Inlet temperature      ≤45°C

Ambient temperature  ≤45°C

Pressure Dew point    ≤ -40°C

Air loss           14.5%

Switch time          5-10min

Pressure drop        ≤ 0.21bar

Desiccant            activated alumina

Inlet oil content      ≤ 0.1ppm(w)

Control method       PIC controller

Power supply         220V/1PH/50Hz

 

Options

Special voltages,110V/1PH/60HZ

Molecular sieve desiccant

Mounted air filters

Higher working pressure up to 400bar

Dew point as low as  -70°C

Higher inlet temperature up to 55°C

Higher protection grade up to IP65

SIEMENS PLC controller

Dew point transducer

Stainless steel pipes lines and fittings

Stainless steel pressure vessel

ASME certificated pressure vessel

Different inlet/out connection

Special gas, such as nitrogen and oxygen 

 

Heatless Air Dryer Dew-point:-40Deg.C,CE